Installing a 100cc 2-Stroke Engine Kit: A Comprehensive DIY Guide

Welcome to our step-by-step guide on installing a 100cc 2-stroke engine kit. This upgrade will enhance your bike's performance, offering higher speeds and better acceleration. Whether you're a seasoned mechanic or a DIY enthusiast, this guide is designed to walk you through each stage of the installation process.

What You Need

• Wrench Set, Screwdrivers, Pliers, Allen Wrenches, Socket Set.
• 100cc 2-Stroke Engine Kit
• High-Quality Oil, Fuel, Zip Ties, Electrical Tape, Threadlocker, Grease.
• Gloves, Safety Glasses, Ear Protection.
• A clean, well-lit, and ventilated workspace.

Preparation Steps

Cleaning and Setting Up:

• Clean your bike and check the frame for any damage.
• Remove any parts that might obstruct the installation.
• Ensure compatibility between the engine kit and your bike.
• Set up your workspace for easy access to tools and parts.

Unboxing the 100cc 2-Stroke Engine Kit

Inventory and Organization:

• Lay out all parts and check for completeness and damage.
• Organize components for ease of access during installation.

Installation Process

1. Mounting the Engine

• Position the Engine: Carefully place the engine in the designated area on your bike’s frame. Ensure it's aligned correctly and sits level.
• Secure the Engine: Use the provided mounting brackets and bolts to securely attach the engine to the frame. Remember to apply threadlocker to the bolts to prevent them from loosening due to vibration.

2. Installing the Drive Chain

• Align the Sprocket: Install the drive sprocket onto the engine, ensuring it's perfectly aligned with the bike's rear sprocket for a smooth chain operation.
• Attach the Chain: Place the drive chain over the sprockets. Adjust the chain tensioner to achieve the right amount of slack – not too tight and not too loose.

3. Setting Up the Fuel Tank

• Mount the Tank: Position the fuel tank on the bike’s frame, usually above the engine. Ensure it's stable and properly aligned.
• Secure the Tank: Fasten the tank using straps or brackets, making sure it's snug and secure.

4. Connecting the Throttle and Clutch

• Throttle Assembly: Attach the throttle handle to your bike's handlebar and run the cable to the carburetor. Adjust for smooth operation without any kinks in the cable.
• Clutch Installation: Install the clutch lever on the handlebar and connect the clutch cable to the engine. Ensure the clutch engages and disengages smoothly.

5. Wiring the Engine

• Electrical Connections: Follow the kit’s wiring diagram to connect any electrical components, like the ignition coil and kill switch.
• Secure Wiring: Use zip ties to neatly secure the wiring along the frame, ensuring they are clear of any moving parts.

6. Installing the Exhaust

• Attach the Exhaust: Mount the exhaust pipe to the engine’s exhaust port. Ensure it's tight and well-sealed to prevent any leaks.
• Check Clearance: Make sure the exhaust doesn't come in contact with any parts that could melt or be damaged by the heat.

7. Final Touches

• Check All Connections: Go over each part you've installed. Ensure that everything is tight, secure, and properly connected.
• Lubricate Moving Parts: Apply grease and oil where necessary to ensure smooth operation.

8. Safety Check

• Inspect Your Work: Before starting the engine, do a thorough inspection to ensure everything is assembled correctly and safely.
• No Loose Parts: Double-check that there are no loose tools or parts left on or around the bike.

Troubleshooting Common Issues

Solutions to Potential Problems:

While installing your 100cc 2-stroke engine kit, you might encounter a few hiccups along the way. It's completely normal, especially if it's your first time. Here, we'll address some common issues you might face and provide solutions to keep your installation on track.

1. Engine Doesn't Fit Perfectly

• Issue: The engine doesn’t align properly with the mounting points on the bike frame.
• Solution: Double-check the compatibility of the engine with your bike's model. You may need to adjust the mounting brackets or modify the frame slightly.

2. Chain Alignment Problems

• Issue: The drive chain doesn't line up correctly with the sprockets.
• Solution: Realign the rear sprocket or use spacers if necessary. Ensure that the engine is mounted straight so that the chain runs directly between the sprockets.

3. Throttle or Clutch Cable Issues

• Issue: The throttle or clutch cable is too tight, too loose, or not operating smoothly.
• Solution: Adjust the tension of the cables. Ensure they are routed correctly without any kinks or sharp bends.

4. Fuel Tank Leaks

• Issue: The fuel tank is leaking at the seams or connections.
• Solution: Check and tighten all connections. If the tank itself is leaking, it may be a manufacturing defect and you might need a replacement.

5. Electrical Connections Not Working

• Issue: The engine won't start, or the electrical components aren't functioning.
• Solution: Double-check all your wiring connections against the wiring diagram. Ensure there are no loose or misconnected wires.

6. Engine Vibrates Excessively

• Issue: The engine is shaking more than expected when turned on.
• Solution: Check that the engine is mounted securely. Use rubber pads or mounts to reduce vibration, if necessary.

7. Noise from the Chain or Sprockets

• Issue: Unusual noise coming from the chain or sprocket area during operation.
• Solution: Lubricate the chain and check for proper tension. Ensure the sprockets are aligned and securely fastened.

8. Exhaust Issues

• Issue: The exhaust is too loud, or there's smoke coming from the exhaust area.
• Solution: Make sure the exhaust is properly attached and sealed. Check for blockages or leaks in the exhaust system.

Testing and Safety Checks

Post-Installation Verification:

1. Initial Engine Start

• Fuel Up: Fill the tank with the correct mix of fuel and oil as specified for your engine. For traditional 2-stroke engines, it's recommended to use a fuel-to-oil mixture of 40:1 from start to finish. This means adding 3.2 ounces of 2-stroke oil for every gallon of gasoline. While you can choose between regular 87-grade or higher octane 91-grade gasoline based on your preference, standard gasoline is generally adequate. We recommend using either a synthetic blend or fully synthetic oil for optimal performance.
• Check for Leaks: Before starting the engine, inspect for any fuel or oil leaks around the engine and fuel lines.
• Start the Engine: Turn on the engine and let it idle. Listen for any unusual noises and observe the engine's behavior.

2. Test the Throttle and Clutch

• Throttle Response: Gently rev the engine using the throttle. Check for smooth acceleration and deceleration.
• Clutch Functionality: Engage and disengage the clutch several times. It should operate smoothly without sticking or excessive resistance.

3. Brake and Chain Check

• Brake Function: Ensure both front and rear brakes are working properly.
• Chain Tension: Recheck the chain tension after the engine has run for a few minutes. Adjust if necessary.

4. Final Inspection

• Bolts and Fasteners: Go over all bolts and fasteners to ensure they are tight and secure.
• Exhaust and Mounts: Double-check the exhaust system and engine mounts for any signs of loosening or leakage.

5. Test Ride

• Short Ride: Take a short test ride in a safe, controlled environment. Pay attention to the engine's performance, noise, and overall bike handling.
• Monitor Engine Behavior: Keep an eye on the engine temperature, vibration, and any unusual sounds.

6. Post-Ride Checks

• Inspect After Riding: After the test ride, inspect the bike again for any issues like leaks, loose parts, or abnormal wear.
• Cool Down: Allow the engine to cool down before conducting a final inspection.

7. Safety Reminders

• Be Cautious: If you notice anything unusual during the test ride, stop immediately and address the issue.
• Wear Protective Gear: Always wear appropriate safety gear, including a helmet, gloves, and eye protection, when riding.

Successfully testing your engine is a significant step in the installation process. It ensures that your hard work has paid off and that your bike is safe to ride. In the next section, we'll cover some maintenance tips to keep your 100cc 2-stroke engine running smoothly for years to come.

Maintenance Tips

Now that your 100cc 2-stroke engine is installed and running smoothly, regular maintenance is key to ensuring its longevity and optimal performance. Here are some essential tips to keep your engine in top shape:

1. Regular Engine Checks

• Oil and Fuel Mixture: Always use the recommended oil and fuel mixture for your engine. Incorrect mixtures can lead to poor performance and damage.
• Spark Plug Maintenance: Regularly check and clean the spark plug. Replace it if it shows signs of wear or damage.

2. Chain and Sprocket Care

• Chain Lubrication: Keep the chain well-lubricated to reduce wear and tear.
• Tension Adjustment: Regularly check and adjust the chain tension to prevent slippage or excessive wear on the sprockets.

3. Air Filter Maintenance

• Clean Regularly: Clean the air filter according to the manufacturer's schedule to ensure optimal air flow.
• Replace When Needed: Replace the air filter if it becomes too dirty or damaged.

4. Carburetor Adjustment

• Regular Tuning: Over time, the carburetor may need adjustments to maintain proper fuel and air mixture.
• Cleaning: Keep the carburetor clean to prevent build-up and clogging.

5. Checking Bolts and Fasteners

• Regular Inspection: Frequently check that all bolts and fasteners are tight and secure, especially after long rides or rough usage.
• Use Threadlocker: Apply threadlocker to critical bolts to prevent them from loosening due to vibration.

6. Exhaust System Care

• Check for Leaks: Regularly inspect the exhaust for leaks or cracks.
• Cleaning: Keep the exhaust system clean to prevent build-up and ensure efficient operation.

7. General Engine Health

• Cooling System: Ensure the engine does not overheat during use. Check for any blockages or malfunctions in the cooling system.
• Regular Cleaning: Keep the engine clean from dirt, grime, and oil. A clean engine runs cooler and more efficiently.

8. Storage Tips

• Proper Storage: If you plan not to use your bike for an extended period, store it in a cool, dry place.
• Fuel Treatment: Use a fuel stabilizer if the bike will be stored for more than a month to prevent fuel from deteriorating.

Remember, the key to enjoying the full potential of your upgrade is regular maintenance and care. By following the maintenance tips outlined in the previous section, you can ensure that your engine remains in peak condition for years to come. We hope this guide has been informative and helpful. Whether you're a seasoned mechanic or a first-time DIYer, we believe that anyone with the right tools and a bit of determination can undertake a project like this. Feel free to share your experiences, challenges, and successes in the comments below. Your insights could be incredibly valuable to others embarking on similar projects.

Ride safely, enjoy the new power under your pedals, and always wear your helmet!

We're Here to Help

We have the best customer service and education in the industry. Have questions or need help? Give us a call 1-800-317-0479

Serving You Since 2007

Since 2007, we've shipped over 1 million orders to happy customers. We're the most trusted name in the industry, with the lowest prices and happiest customers!

Fast Shipping Nationwide

With multiple warehouses nationwide, get your order fast! Most orders shipped same-day or next day!

Lifetime Technical Support

We're here to help, no matter what! Get free technical support for the lifetime of your product.

• Wholesale Program
• Affiliate Program

• Contact Us
• Order Status
• Order Receipt
• Best Price Guarantee
• Installation Guides Videos
• 2 Stroke Trouble Shooting Guide

• Privacy Policy
• Safe and Secure Shopping
• Satisfaction Guarantee
• Terms of Use

Live Chat: Click Here

Phone: 1.800.317.0479

735 Challenger St.

• Track My Order
• Shipping Policy
• Returns
• Warranty
• Navidium Shipping Protection

• Frequently Asked Questions
• Bike Parts Repair and Maintenance
• Cycler's Guide During the Pandemic
• Giveaway Contest Rules

Meta Pay Google Pay Mastercard PayPal Shop Pay Venmo Visa

• Opens in a new window.

We're doing something a little different for the holidays. A lot of our riders have told us that they're worried about making a purchase before our biggest sale of the year. Black Friday. They're afraid that the price might drop a few weeks later.

To help cut down on holiday stress, we've launched our Black Friday Early Access Sale, and backed it with our Black Friday Price Guarantee . Starting with our Black Friday Early Access Sale on 11/1/23, when we put an item on sale before 12/1/23, you'll be getting it at the season's lowest price -- guaranteed. If the price drops on an eligible item, we'll refund you the difference!

Terms and Conditions

Only items showing the "Black Friday Early Access" or "Black Friday Price Guarantee" logos are eligible

• What is the Black Friday Price Guarantee?

If item is discounted even more than our Black Friday Early Access price, you will be eligible for a refund equal to the difference between your purchase price and the lowest marked price.

• How can I receive my eligible refund?

In order to receive the refund, simply contact BikeBerry Customer Service and provide us with your original order number. And we'll take care of it from there! In order to be eligible, you must contact us before 11:59 pm PST on 12/1/23.

Start your holiday shopping today to make sure you get what you want for the holiday season! All Black Friday sale items have limited quantities and may sell out before Black Friday.

We're doing something a little different for the holidays. A lot of our riders have told us that they're worried about making a purchase before our biggest sale of the year. Black Friday. They're afraid that the price might drop a few weeks later.

To help cut down on holiday stress, we've launched our Black Friday Early Access Sale, and backed it with our Black Friday Price Guarantee . Starting with our Black Friday Early Access Sale on 11/1/23, when we put an item on sale before 12/1/23, you'll be getting it at the season's lowest price -- guaranteed. If the price drops on an eligible item, we'll refund you the difference!

Terms and Conditions

Only items showing the "Black Friday Early Access" or "Black Friday Price Guarantee" logos are eligible

• What is the Black Friday Price Guarantee?

If item is discounted even more than our Black Friday Early Access price, you will be eligible for a refund equal to the difference between your purchase price and the lowest marked price.

• How can I receive my eligible refund?

In order to receive the refund, simply contact BikeBerry Customer Service and provide us with your original order number. And we'll take care of it from there! In order to be eligible, you must contact us before 11:59 pm PST on 12/1/23.

Start your holiday shopping today to make sure you get what you want for the holiday season! All Black Friday sale items have limited quantities and may sell out before Black Friday.

We're doing something a little different for the holidays. A lot of our riders have told us that they're worried about making a purchase before our biggest sale of the year. Black Friday. They're afraid that the price might drop a few weeks later.

To help cut down on holiday stress, we've launched our Black Friday Early Access Sale, and backed it with our Black Friday Price Guarantee . Starting with our Black Friday Early Access Sale on 11/1/23, when we put an item on sale before 12/1/23, you'll be getting it at the season's lowest price -- guaranteed. If the price drops on an eligible item, we'll refund you the difference!

Terms and Conditions

Only items showing the "Black Friday Early Access" or "Black Friday Price Guarantee" logos are eligible

• What is the Black Friday Price Guarantee?

If item is discounted even more than our Black Friday Early Access price, you will be eligible for a refund equal to the difference between your purchase price and the lowest marked price.

• How can I receive my eligible refund?

In order to receive the refund, simply contact BikeBerry Customer Service and provide us with your original order number. And we'll take care of it from there! In order to be eligible, you must contact us before 11:59 pm PST on 12/1/23.

Start your holiday shopping today to make sure you get what you want for the holiday season! All Black Friday sale items have limited quantities and may sell out before Black Friday.